Home > Products > DTH Drilling Rig
Categories
Drilling Jumbo
Water Well Drilling Rig
Trailer Mounted Drilling Rig
Crawler Mounted Drilling Rig
Tractor Mounted Drilling Rig
Truck Mounted Drilling Rig
Geological Core Drilling Rig
Fully Hydraulic Core Drilling Rig
Diamond Core Drilling Rig
DTH Drilling Rig
Anchor Drilling Rig
Jet Grouting Drilling Rig
Underground Drilling Rig
Horizontal Directional Drilling Rig
Pile Driver
Accessories
800m DFL-800A Water Drilling Machine for Sale
1. Max. Drill Depth:800m
2. Drill Diameter:105-600mm
3. Drill Pipe: 114*6000mm
4. Drilling Rig for hard rock
5. Air consumption: 16-55m3/min
6. Rotary Torque: 14000N.M
DescriptionParameter
Various drilling processes are available on this rig, such as DTH drilling, through-air reverse circulation drilling, air lifting reverse circulation drilling, cutting drilling, cone bit drilling, core drilling and so on. Mud pump, foam pump, generator etc. can be added according to customers' requirements.

Main Features

1. Convenient and flexible Full Hydraulic Control System
With full hydraulic control system, DFL-800A drilling rig Can always adjust the rig speed, torque, propeller shaft pressure, anti-axial compression, forward speed, increase speed conveniently and flexibly, DFL-800 DTH drilling rig can meet different geological conditions with different drilling tools.

2. Crawler Mounted Drilling Rig with High Leg Support
You can load DFL-800A drilling rig directly with high leg supports. Crawler walking is much more suitable for moving in the muddy working site.

3. Positive and negative Axle Pressure Regulator
As we know, best impact efficiency requires to match with best axial force and speed . The axle pressure of impactor is increasing as the adding of more and more drilling rods in drilling process, you can adjust the positive and negative pressure to ensure the impact to get best axial pressure. Then you can get the max drilling efficiency.

4. Rig Chassis
May be self-crawler chassis, it can be self-propelled vehicle chassis. DFL-800A drilling rig can be self-propelled crawler mounted, it can also be truck mounted according to your requirements.

5. High Efficiency
Since DFL-800A drilling rig is with full hydraulic system and top-drive rotary drilling and lifting method, which makes the rig be fit for the various drilling techniques and a variety of drilling tools. Manipulation is convenient and flexible. The drilling speed is 10-35m/hr.

6. Low Cost
Down-the-hole drilling bits is used for hard rock drilling. As you know, the DTH rock drilling is high efficiency with lowest cost drilling one meter.
Specifications of DFL-800A DTH Drilling Rig
Drilling Depth 800m
Drilling Diameter 105-600mm
Working Pressure 1.05-3.45MPa
Air Consumption 16-55m/min
Drilling Rod 114*6000mm
Main Shaft Pressure 15 Tons
Lifting Force 35000kg
Fast Lifting Speed 30m/min
Fast Forwarding Speed 65m/min
Rotary Torque 14000NM
Rotary Speed 100rpm
Small Secondary Winch Lifting Force 1500kg
High Leg Stroke 1.7m
Drilling Efficiency 10-35m/hr
Moving Speed 3km/h
Uphil Angle 21 Degree
Dimension 6000*2250*2850mm
Weight 155000kg
Working Condition Rock etc.
Drilling Method Top-drive rotary, DTH with air compressor, Mud pump etc.
Inquiry
Copyright © Zhengzhou Defy Mechanical & Electrical Equipment Co., Ltd. All rights reserved.  Powered By DEFY

Lisa

Sales