Home > Products > Water Well Drilling Rig > Truck Mounted Drilling Rig
Water Well Drilling Rig
Trailer Mounted Drilling Rig
Crawler Mounted Drilling Rig
Tractor Mounted Drilling Rig
Truck Mounted Drilling Rig
Geological Core Drilling Rig
DTH Drilling Rig
Drilling Jumbo
Anchor Drilling Rig
Underground Drilling Rig
Horizontal Directional Drilling Rig
Pile Driver
Dredging Robot
DFC-200 200m Truck Mounted Water Well Drilling Rig
200m Truck Mounted Borehole Drilling Rig DFC-200 with 6*4 CHANAN Truck both can work with DTH and Tricone bits drilling tools, it has very good performance on hard rock etc. geological condition.

1. DFC-200 is designed by our engineers, adopting truck mounted and is a rotary drilling rig.

2. The truck chassis  adopts  the special crane chassis of brand CHANAN TRUCK, the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are set up on the chassis.

3. It is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.

4. The power comes from the truck engine, the rig sets up distribute implement and hydraulic system.

5. We can upset the spare electric engine and clutch implement according to client’s requirement, so that the rig can work with diesel engine or electric engine.

6. One set of 100Kw generator has been set on the chassis, it will supply the power to drilling rig, and it is convenient to illuminate or work at night.

7. The adding pressure device is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement.

8. The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated.

Working site of DFC-200 Truck Mounted Water Well Drilling Rig


Technical parameter of DFC-200 Borehole Machine
 Drilling depth(M) 200
 Drilling diameter(mm) 200-1500
 Speed of turntable(r/min) 6.7;10;17;43;63;108 (reverse)
 Torque of turntable(KN.m) 14.5;9.7;5.7;2.3;1.5;0.9 (reverse)
 Single rope lifting capacity of main windlass(KN) 30
 The capacity of main windlass(KN)  180
 Single rope lifting capacity of hydraulic windlass(KN) 30
 The capacity of hydraulic windlass(KN) 120
 The lifting capacity of hook(KN) 180
 Bearing capacity of mast (KN) 180
 The height of mast (mm) 10200
 Bearing capacity (t) 25
Pipe  Kelly bar(mm) 108×108×6000
 Assistant pipe (mm) Ф89×10×4500
plunger pump

 Diameter of cylinder (mm) 150
 Stroke of piston (mm) 180
Theory of flow (L / min) 600      850
Rated pressure (Mpa) 3         2
Pounding  times (min-1) 58        82
 Diameter of suction tube (mm) 127
 Diameter of drain pipe (mm) 64
 Input speed (r / min) 470
 Input power (kw) 40
 Overall dimensions (mm) 2000*1030*1400
Weight (t) 1.5
Truck chassis
 Drive form 6×4
 Model YC6J180-33 (Europe II emission standard)
 Rated power(KW) 132
 Speed(r/min) 2500
 Size(L*W*H)(mm) 100320×2400×3200
Electric generator Rated power (kw) 100
Rated voltage(v) 400
Speed (r/min) 1500
Frequency(Hz) 50
 The highest speed(Km/h) 75
 Weight(kg) 17340
 Transport size(L*W*H)(mm) 10252*2400*3726
 Working size(L*W*H)(mm) 10032*3570*11459
Copyright © Zhengzhou Defy Mechanical & Electrical Equipment Co., Ltd. All rights reserved.  Powered By DEFY